Stacking rings are surging in recognition once again this period! Combine two, a few, or far more rings to generate your own trendy glance. Your elegant stackers do not will need to match in band width or design and style. Combine metals and gemstones on bands that in good shape collectively on one or two fingers and specific your personal design and style. Below are guidelines from a few of our favored jewelers for earning stacking rings and styling them.
Previously mentioned: Stacking rings by Julie Sanford
Mix Stones and Configurations
Kristen Baird suggests using a selection of gemstone shapes, sizes, and cuts to insert visual complexity to your stack. She suggests, “You can either decide for a monochrome coloration scheme this sort of as the twin tones of orange carnelian and citrine in the stack earlier mentioned or go for stones that enhance every single other.” Making use of a blend of prong and bezel settings can go a extensive way towards producing your have fashion, far too.
Blend Metals and Gemstones
“Do not be fearful to mix metals!” is Kristen’s motto for her most current selection. She advises, “Stacking rings are all about assortment inside a shared concept, so unique metals are a fantastic way to insert variation to a stack of if not comparable rings. In the illustration higher than, I applied the precise exact same foundation but switched up both of those the metals and the gemstones shades and dimensions.” Kristen shares jewellery making–and wearing–advice @kristenbairdjewelry on Instagram and TikTok.
Julie Sanford suggests resizing numerous bands to make a trendy stack. She says, “The excellent information is that thin stacking rings can stretch very easily on a mandrel. But the bad information is that you can extend them way too far really immediately. If you have a precise dimensions in head, you do not want to be as well hefty-handed reshaping the ring or it will extend further than your sought after dimensions.” Your ring might however be uneven following you make it round on the mandrel. You can even it out the relaxation of the way with two bench blocks if you really do not want to extend it even more.
- Put the uneven ring on a bench block.
- Posture a further bench block straight above the ring as in the photo above.
- Use a mallet to carefully tap the top rated bench block. The ring will flatten in in between.
This trick also is effective to level bezels immediately after you solder the seam, so they sit without the need of gaps on a flattened backplate!
Measure and Make a Ring
When you are ready to make your have stacking bands, use this helpful chart to come across the length of sheet metal you require for the metal gauge you are utilizing and ring dimension you want. Consequently, it will be straightforward to minimize the right size of steel and follow Helen Driggs’ recommendations for producing a ring band in five straightforward methods.
